NKC43 Network Converter

Description

Features:

• NKC series attaches directly into J1939 and NMEA 2000 networks of comparable engines, transmissions and gen-sets and converts the signals to the NMEA 2000 or J1939 CAN bus data
• J1939 & NMEA 2000 output for use with on board device
• NKC series can be used to get engine data, tank levels, alarm status, generic pressure and temperature indications from any resistive sensors
• Programmable sensor types including fuel, fresh water, waste water, live water, oil, and black water
• Programmable sensor number up to 16 per sensor type
• Adapts American standard (240~33 ohm) or European standard (0~190 khm) resistive sensors to NMEA 2000 network.
• NMEA 2000 interface

Specifications:

• Item No.:
  • 1 Channel JX00066 (0-190 ohm)
  • 2 Channel JX20067 (240-33 ohm)
  • 4 Channels JKE00525
• Dimension: NKC 70*Ø27mm
• Protection Rating: IP67
• Signal Output: NMEA 2000/J1939 Network Messages
• Operating Voltage: 8~32V
• Connector: Male “Micro-C” Pinout
• Operation Temperature: -40°F ~ +185°F(-40°C~+85°C)
• Mac Current: 50mA

Manual:

Manual – NKC43