Holding Tank Level Sender – SHS/SHST

The Holding Tank Level Sender is used in mainly black or grey water tanks. Can also be used in freshwater tanks.

*Call for availability of different lengths not featured

Connector: Delphi, Tyco, or others are available according to customer’s requirements upon request

IP Rating: IP 67

Length Range: 4″, 6″, 8″, 12″, 16″, 18″, 20″, 22″, 24″, 28″, & 38″

Custom lengths available upon request

Material: SS316 Stainless Steel

Max Current: 500mA

Mounting: NPT 1 1/2″ thread twist-in, with standard 6 hole thread flange plate, standard 6 hole under ring and 6 piece of M5x30 screws

Operating Temperature: -40°F ~ +185°F (-40°C ~ +85°C)

Output Signal: 240-33Ω

0 – 190Ω available upon request

Rated Power: 125mW

Resolution Range: 10~40mm

Wire: PVC material (PA corrugated pipe cover is optional)

Additional Information:

SHS Sender Mounting Instructions
Troubleshooting Guide
Please note that we recommend a 25% clearance from the bottom of the holding tank.